Three Way Lab Faucet

The three way lab faucet should be made of yellow 59-1 grade copper rods and H63 brass tubes, using the red stamping forging process, and there should be no sand holes. The surface is coated with high-brightness epoxy resin, which is resistant to ultraviolet radiation and chemical corrosion. The water inlet of the faucet is equipped with a plastic filter screen to prevent fine impurities in the water from entering the faucet.

● The height of lab faucet ≥585mm, the weight of lab faucet ≥1740g, the main pipe diameter≥Φ26*1.2mm, the arm pipe diameter ≥ Φ22*1.2mm, the gooseneck pipe diameter ≥ Φ19*1.0mm, and the diameter of the fixed base ≥ 55mm.

The three way lab faucet handle in the laboratory is equipped with a built-in switch color device. Green indicates the safe off state, and red indicates the on state for use. This enables a quick understanding of the faucet's opening and closing status in the event of a water outage, avoiding the risk of water leakage caused by a water cut-off in the laboratory.

 

Lab accessories and emergency eye wash.

We offer a variety of lab accessories, including items below:

Hot Tags: three way lab faucet, China three way lab faucet manufacturers, suppliers, factory, Two Way Lab Tap, Stainless Steel Lab Tap, Brass Water Cock, Single Way Lab Tap, lab water tap, Three Way Lab Tap